Description
Grow Insane LDPE 13mm Internal Diameter (1/2 inch) Irrigation Pipe that can be installed on the surface or just below the surface.
High Quality LDPE pipe at a price and quality no one else can match.
High UV resistance and 100% Crack-resistant
Firm and resistant to kinks or damage caused by routine landscape maintenance activities
Operating water pressure rating: up to 6 bar (Most 13mm LDPE is rated only to 4)
For domestic and commercial irrigation systems
Dimensions
16mm Outer diameter
13mm Inner diameter
Wall thickness: 1.5mm
Please be aware this is a pipe not a hose. It is designed for punching and fitting connectors into and is usually installed with Saddle Clamps, Hose Hold Down Stakes or at a shallow depth. This pipe fits all main brand 13mm fittings including Hozelock, Antelco and DN16 generic fittings. This LDPE pipe is not suitable for deep installation and should NOT be used to carry human drinking water. This low density polyethylene pipe is a thin walled pipe that is great for domestic and commercial irrigation systems. The pipe is flexible, UV stabilised and will resist damage from frost during the winter months, but you should be sure to drain the pipe as expanding water will cause damage.
This pipe can be punctured with a Hole Punch for off-taking. Works with all of our 13mm Fittings.
Working in cold temperatures: LDPE pipe can be inflexible and difficult to handle in cold weather. We recommend that installation is best done in temperatures above 10C, the warmer the better. LDPE pipe is more inclined to kink and split when handled roughly in freezing temperatures.
Whilst 100m coils are shipped, barcoded and branded, shorter lengths are supplied without the brand markings although this is the same product and pipe manufactured to the same standard.
