Description
LDPE pipe at a price our competitors can’t match
- 18mm internal diameter
- 20mm (3/4 inch) external diameter
- Perfect for our 19mm fittings and connectors
- 2mm wall thickness
- Each coil is 100 metres long but can be provided in smaller increments.
- High UV resistance and 100% crack-resistant
- Resists kinks and damage caused by routine landscape maintenance activities
- Operating water pressure rating: up to 4 bar
- For domestic and commercial irrigation systems
Please be aware this is a pipe not a hose, it is designed for punching and fitting connectors into and is usually installed with saddle clamps, hold down stakes or at shallow depth. This LDPE pipe is not suitable for deep installation and should NOT be used to carry human drinking water. This low density polyethylene pipe is a thin walled pipe that is great for domestic and commercial irrigation systems. The pipe is flexible, UV stabilised and will resist damage from frost during the winter months, but you should be sure to drain the pipe as expanding water will cause damage. This pipe can be punctured with a hole punch for off-taking to irrigation. Compatible with all of our 19mm fittings. Please note: This pipe is supplied in the exact coil length you specify except where a length greater than 100 meters is ordered in which case coils of 100m will be supplied with the surplus separately. Working in cold temperatures: LDPE pipe can be inflexible and difficult to handle in cold weather. We recommend that installation is best done in temperatures above 10C, the warmer the better. LDPE pipe is more inclined to kink and split when handled roughly in freezing temperatures. To make working with LDPE pipe easier, place it in warm water before attaching fittings. Pipe and length is accurate to within 5%. Whilst we only charge 99p for a sample of this pipe, just ask for sample when you place an order with any of our products and we will happily include a piece, free of charge.
